Gamewell-FCI LDM2-32 Elevate Lamp Driver Module, 32 Outputs
The Gamewell-FCI LDM2-32 is part of the Gamewell-FCI Elevate™ fire alarm platform. AIO-bus lamp driver module with 32 LED driver outputs and 10 switch inputs for custom graphic annunciators on Gamewell-FCI Elevate panels.
SKU: LDM2-32
Free 30-Day Returns
Hassle-free returns
1-Year Warranty
Manufacturer warranty
Product details
The Gamewell-FCI LDM2-32 is part of the Gamewell-FCI Elevate™ fire alarm platform. AIO-bus lamp driver module with 32 LED driver outputs and 10 switch inputs for custom graphic annunciators on Gamewell-FCI Elevate panels.
Lamp driver module for use with remote custom graphics. Provides 32 LED driver outputs and 10 programmable switch inputs (one pre‑configured for the lamp‑test input), communicates over the AIO bus.
Key features
- Each LED output programmable for local or network event, point or zone status, releasing zone states
- Onboard inputs programmable for ACK, Signal Silence, Reset, Drill, control/disable
- External switch inputs momentary or toggle
- Integral piezo (can be disabled) with option for external piezo
- Configurable as router or peripheral
- Customizable 80 character primary label
- Power-limited two-wire RS-485 (AIO) interface; up to 6,000 ft from panel
- Powered by 24 VDC from panel or remote power supplies
- On-board LEDs for power, trouble, test, TX/RX on main and local AIO bus
- UUKL Listed for Smoke Control (FSCS interface)
Compatibility and documents
Works with: GFP-A, GFP-AR, LDM-CBL24, LDM-CBL48, AIO-CBL
LDM2-60 has 60 outputs / 21 inputs and needs two LDM-CBL cable sets.
Lead time: typically ships in 2–3 weeks.
Specifications
| Model | LDM2-32 |
| Platform | Gamewell-FCI Elevate |
| Operating voltage | 18V to 30VDC |
| Standby current | 23mA @ 24VDC (excluding LED current) |
| Maximum current per output | 20 mA |
| Module size | Approximately 4.4" (11.2cm) x 7.0" (17.78cm) |
| Max per FACP | 80 LDM2-32/LDM2-60; up to 10 routers each supporting up to 15 peripherals |
| UL Listed | S635 |
| FM | Approved |
| CSFM | In Progress |
| FDNY | In Progress |
| Country of origin | USA |
| Outputs | 32 LED driver outputs |
| Inputs | 10 (one preconfigured for lamp test) |
| Alarm current | 50mA @ 24VDC (excluding LED current) |
| Dimensions | Approximately 4.4" x 7.0" |
